Lower Fairings


The highway bar is from an 07 HD Touring model. The HD fairing lowers were display units, but were the newer style with the larger air louvers that lets more air through when needed.	I made small brackets to kickthe lower ends of highway bar out a little, so no trimming of lower fairings were needed.



At the bottom of highway bar you can see the quick detachable hardware.	I mounted highway bar to upper gusset where my Lindby bar was mounted.


	Pix of clearance around front header pipe.

Stebel horn was no problem for lower fairing installation.	Lower fairing just barely touches brake line for rear master cylinder.

Just turn bottom knob for quick detachable hardware.	Just turn top knob in glove box for quick detachable hardware.

I kept the lower chrome brackets from my Lindby Bar, and made a small bracket to connect that bracket to the lower mounting tab on the HD Highway bar. Now I am going to have to make another set of the small brackets to send off to be chromed, or powder coat these locally.	This is the top mounting tab on the HD Highway bar. I just used the hole in the down tubes brace plate, that I had drilled for my Lindby Highway bars. It was a perfect fit. I did remove the nut that was attached to the top HD Mounting tab. Probably would not have had to, but I thought it would be easier to run the bolt from outside and the nut inside.